Drive in steel pallet rack , it is also called Drive through shelving, which provides a high density and very space efficient. Drive In or Double Access Systems (Drive through Racking) consists of continuous lanes of racking with only a single load and retrieval aisle. Loading and unloading is undertaken by means of counter balance or reach trucks that drive down each lane into the racks.
Drive in racking is also called corridor type racking, composite structure, specialized high intensity drive in brackets, high strength drive in beam, frames are connected to top beams by bolts nuts.
The depth of the single side drive in racking which is against the wall should not be more than 9 pallet locations, and that of double side drive-in should be less than 15 pallet positions so as to ensure the loading efficiency of forklifts and stability of racking.
It's best to make drive in lower than H11000mm because of its not so good stability which is the weakest compared with other racking system.
The drive in racking should be equipped with back, top cross beams, etc. to stabilize the racks.
This type of racking is densely arrayed, making full use of storage space; both "first in first out" and "first in late out" are available, suitable for storing few types of goods with large quantity.
Widely used in milk, drink industry, and also be welcome by cold storage.
Cantilevered shelves are mostly used in the machinery manufacturing industry and building materials supermarkets. After adding the shelf, it is especially suitable for the warehouse with small space and low height. It has convenient management, wide field of vision and higher utilization than ordinary shelves.
We will reply as soon as possible. Thank you for your support for our warehouse storage equipment.